New Steel

Use this form to place an order. Use the “additional info” field if you’d only like a quote, need custom cutting, non-stock items, or anything else.

Order Form
Select all that apply

Angle

Custom lengths cost $1 per cut

Channel

Custom lengths cost $1 per cut

Pipe

Custom lengths cost $1 per cut

Solid Round (Cold Roll)

Custom lengths cost $1 per cut

Solid Round (Hot Roll)

Custom lengths cost $1 per cut

Flat

Custom lengths cost $1 per cut

HSS

Custom lengths cost $1 per cut
Custom lengths cost $1 per cut

Solid Square

Custom lengths cost $1 per cut

Casing

Custom lengths cost $1 per cut

Plate

Custom lengths cost $1 per cut

Expanded

Custom lengths cost $1 per cut

Rebar


Sending
 

Having Trouble? Click these tabs for additional info

Angle

How to measure

   StructAngle   Angle is measured first by the lengths of the legs and then the thickness of the legs. Contact National Salvage for more information about metal types, shape and grades available.

Standard Sizes

Available Sizes Available Lengths
0.500 X 0.500 X 0.125 ST STRUCTURAL ANGLE

10′/20′

0.750 X 0.750 X 0.125 ST STRUCTURAL ANGLE

10′/20′

1.000 X 1.000 X 0.125 ST STRUCTURAL ANGLE

10′/20′

1.250 x 1.250 x 0.125 ST STRUCTURAL ANGLE

10′/20′

1.500 x 1.500 x 0.125 ST STRUCTURAL ANGLE

10′/20′

2.000 x 2.000 x 0.125 ST STRUCTURAL ANGLE

10′/20′

——————————————————–
1.000 x 1.000 x 0.188 ST STRUCTURAL ANGLE

10′/20′

1.250 x 1.250 x 0.188 ST STRUCTURAL ANGLE

10′/20′

1.500 x 1.500 x 0.188 ST STRUCTURAL ANGLE

10′/20′

2.000 x 2.000 x 0.188 ST STRUCTURAL ANGLE

10′/20′

2.500 x 2.500 x 0.188 ST STRUCTURAL ANGLE

10′/20′

3.000 x 2.000 x 0.188 ST STRUCTURAL ANGLE

10′/20′

3.000 x 3.000 x 0.188 ST STRUCTURAL ANGLE

10′/20′

——————————————————–
1.000 x 1.000 x 0.250 ST STRUCTURAL ANGLE

10′/20′

1.250 x 1.250 x 0.250 ST STRUCTURAL ANGLE

10′/20′

1.500 x 1.500 x 0.250 ST STRUCTURAL ANGLE

10′/20′

2.000 x 2.000 x 0.250 ST STRUCTURAL ANGLE

10′/20′

2.500 x 2.500 x 0.250 ST STRUCTURAL ANGLE

10′/20′

3.000 x 3.000 x 0.250 ST STRUCTURAL ANGLE

10′/20′

4.000 x 3.000 x 0.250 ST STRUCTURAL ANGLE

10′/20′

4.000 x 4.000 x 0.250 ST STRUCTURAL ANGLE

10′/20′

Angle ImageHot Rolled Steel Angle is a product which has two legs to form a 90 degree angle. This product is designed to be used in both structural applications and general fabrication. Its range of applications are wide and can include trailer manufacturing, safety cages, walkways, farming equipment, and anywhere where it is important to improve the structure’s rigidity. Hot rolled angle is available in equal leg (legs are the same length) or unequal leg (legs are different lengths). Contact National Salvage for more information about metal types, shape and grades available.  
 

Channel

How to measure

   Struct Channel If laid flat, it can be measured by taking the width of the channels, the height of its Flange (legs) and Web (thickness of the material between the two flanges). More commonly it is measurement by taking its width and pounds per foot.   

Standard Sizes

Available Sizes

LENGTH THAT YOU CAN BUY

————————–

——————–

2″ X 1″ X 1/8″ CHANNEL

10′/20′

2″ X 1″ X 3/16″ CHANNEL

10′/20′

3″ CHANNEL

10′/20′

4″ CHANNEL

10′/20′

5″ CHANNEL

10′/20′

6″ CHANNEL

10′/20′

7″ CHANNEL

10′/20′

8″ CHANNEL

10′/20′

9″ CHANNEL

10′/20′

10″ CHANNEL

10′/20′

10′/20′

10′/20′

Channel ImageHot Rolled Steel Channel is a structural metal that has many different applications across several industries. It is a common building and construction material. It also used in the ship building and automotive industries, and general fabrication where structural properties are required. Hot Rolled Channel comes in many sizes and shapes such as Bar Mill, Ships and Car Sizes, Stair Stringers (Junior) and the more common Structural Channel. Contact National Salvage for more information about this metal type, shape and grades available.

Expanded

How to measure Expanded

   Plate  If ordering expanded metal sheets, you need to know measurement of the diamond (width-wise) as well as the dimensions shown in the diagram.

Standard Sizes

Coming soon will be a list of common sizes that we carry in stock as well as sizes that we are able to order in.
Expanded Metal ImageHot Rolled Steel Expanded Metal (or expanded sheet) is essentially a piece of hot rolled sheet that has been cut and stretched into a mesh with diamond-shaped spaces. There are two types of Expanded Metal in hot rolled: raised and flattened. Expanded Metal is typically used in applications where it is essential to have water, light or air pass through. Contact National Salvage for more information about metal types, shapes and grades available.

Flat Bar

How to measure Flat

     A36Flat Flat Bar is measured by the thickness and the width & typically available in lengths up to 20′

Standard Sizes

Coming soon will be a list of common sizes that we carry in stock as well as sizes that we are able to order in.
Flat/Rectangular Bar ImageHot Rolled Steel Rectangular Bar is also referred to as Hot Rolled Flat Bar. It is measured by first taking its thickness and then its width. Hot Rolled Steel Bar is a commonly used metal across many industries. It can be used in place of cold rolled flat bar in situations where precise shapes and tolerances are not required. Hot Rolled Steel Bar is typically less expensive than Cold Rolled Steel Bar. Contact National Salvage for more information about metal types, shapes and grades available.

Solid Round Bar

How to measure Solid Round

     RoundHot Rolled Steel Round Bar is measured by its diameter. 

Standard Sizes

Hot Rolled Round Bar can be purchased in sizes as small as 3/16″ diameter and as large as 12″ diameter.
Round Bar ImageIt has many applications across many industries including fabrication, manufacturing and repair. It can be easily welded and fabricated.  It can be used in place of Cold Rolled Round Bar in situations where precise tolerances are not required. Contact National Salvage for more information about metal types, shapes and grades available. 

Solid Square Bar

How to measure Solid Square

   Square Solid Square is measured by taking its thickness or its width which are the same.  

Standard Sizes

Coming soon will be a list of common sizes that we carry in stock as well as sizes that we are able to order in.
Square Bar ImageHot Rolled Steel Square Bar is a common bar stock with many applications. It is measured by taking its thickness or its width which are the same. It is characterized by its radius corners, as opposed to cold rolled solid square, which has sharper corners. Contact National Salvage for more information about metal types, shapes and grades available.

Schedule Pipe

How to measure Pipe

   Pipe ImagePipe is measured by first taking the inside nominal diameter, and then the thickness of the wall (also known as Schedule).   

Standard Sizes

Coming soon will be a list of common sizes that we carry in stock as well as sizes that we are able to order in.
Round Tube ImageHot Rolled Steel Pipe is manufactured to move volumes – such as water, gas and oil. It is a material commonly used in plumbing and construction applications as well as the oil industry, although it can serve a large variety of purposes. Contact National Salvage for more information about metal types, shape and grades available.

H.S.S.

Standard Sizes

Coming soon will be a list of common sizes that we carry in stock as well as sizes that we are able to order in.
Square Tube ImageRectangular Tube ImageSteel Tube is hot rolled steel that has been formed into a square or rectangular tube. It is commonly referred to as HSS, (meaning Hollow Structural Section). Typically it has an inside seam due to it being welded, although can be ordered as a seamless for uses such as receivers. Applications include trailers, barriers, racks, home construction and many more. Used in general fabrication where strength is a requirement. Contact National Salvage for more information about this metal type, shape and grades available.

Hot Rolled Steel Plate

How to measure Plate

   PlateHot Rolled Steel Plate is a piece of flattened hot rolled steel that is measured by the thickness, using the gauge when less than than 3/16″ (0.188). Our typical stock sheets are 4′ x 8′  

Standard Sizes

Coming soon will be a list of common sizes that we carry in stock as well as sizes that we are able to order in.
Plate Image It has many applications in the manufacturing, industrial and construction industries where it is used structurally (sometimes aesthetically). Contact National Salvage for more information about metal types, shape and grades available.